Charge as a liquid
R404A is a zeotropic blend. Remove liquid from the cylinder to maintain the intended composition.
R404A
Regular price
$99.00
Sale price
$99.00
Unit price
per
COMMERCIAL REFRIGERATION • A1
Reliable cold-side service stock for compatible equipment
R404A is a three-component blend used in many existing low- and medium-temperature commercial refrigeration systems. This 24 lb cylinder is intended for qualified technicians maintaining equipment that is clearly labeled and approved for R404A.
Net content24 lb / 10.9 kg
Safety classA1 • non-flammable
CompositionR125 / R143a / R134a
Primary fitLow & medium temperature
Know exactly what you are ordering
Clear identification matters. Compare these details with the equipment nameplate, service documentation and cylinder label before connecting service tools.
| Refrigerant designation | R404A |
|---|---|
| Refrigerant family | HFC blend |
| Blend composition by weight | R125 / R143a / R134a — 44% / 52% / 4% |
| Net refrigerant weight | 24 lb / 10.9 kg |
| Safety classification | A1 — lower toxicity, no flame propagation |
| Typical equipment | Compatible commercial refrigeration and transport-cooling systems |
| Cylinder format | Sealed steel cylinder |
| Intended user | Qualified refrigeration professionals |
Built for the correct system—not every system
Common compatible work
- Walk-in coolers and freezers labeled for R404A
- Reach-in display cases and food-service cabinets
- Cold-storage and ice-making equipment
- Approved transport-refrigeration and process-cooling systems
Confirm before ordering
- The equipment label and service documentation specify R404A
- The lubricant type and existing refrigerant are positively identified
- The leak has been repaired before recharging
- The complete charge amount is available for a weighed liquid charge
Plan the charge before opening the valve
Avoid mixed charges
Do not top off a contaminated or unidentified circuit. Recover, diagnose and recharge correctly.
Protect system performance
Use clean, dry service tools and follow the equipment superheat, subcooling and charge-weight procedure.
Compatibility is mandatory
R404A is not interchangeable with R22, R407A, R452A, R507 or other refrigerants without an equipment-specific retrofit plan. Verify compressor, lubricant, seals, controls and expansion-device suitability before any conversion.
!
Restricted refrigerant sale
Bulk refrigerant sales in the United States are restricted. Proof of the applicable Section 608 or Section 609 technician certification—or documentation that the purchaser employs a properly certified technician—may be required before fulfillment. The purchaser is responsible for satisfying federal, state and local rules for purchase, transport, storage and use.
S
Handling and storage
Store secured and upright in a cool, well-ventilated location. Protect from physical damage, high heat and direct sunlight. Consult the safety data sheet before handling. Refrigerant can displace oxygen, cause cold burns and create dangerous pressure if mishandled. Never intentionally vent refrigerant.